Product Category
LPG filling station maintenance method
Date: Nov 18, 2019
For LPG skid station safety valves, a gas hot water boiler should be calibrated at least once a year, and the movements should be checked frequently. For example, in order to prevent the valve body of the safety valve and the valve seat from being stuck by dirt such as grease in the gas, the wrench is manually exhausted periodically to brush the dirt.
The LPG skid station pressure gauge should be calibrated every six months. Always check the pressure gauge for normal operation. It is strictly forbidden that the pointer is broken or loose or the indication is not accurate. The failure pressure gauge of the spring tube leakage in the watch is still in use. Sewage LPG skid station for regular cleaning valves should be regularly discharged as daily, so as not to accumulate too much water to accelerate the corrosion of the tank and affect the life of the pressure vessel.
If the surface of the LPG skid station is found to be severely damaged during use, it should be repainted to prevent excessive corrosion of the LPG skid station and affect the service life. According to the actual use of the user, the LPG skid station should be cleaned regularly to ensure that the LPG is cleaned in the armor, so as to prevent the oil from collapsing inside the LPG. 
The safe use of pressure vessel storage tanks is also a way to maintain LPG skid station. Regular maintenance of the piggy bank is the key to extending the life cycle of the piggy bank. I hope everyone should pay more attention to the protection and maintenance of the pressure tank. The scope of the pressure tank is very wide, but at the same time it also has certain risks. In the small work on weekdays, it should be carefully maintained, so that it can be used safely and at the same time extend its service life.
The LPG skid station of Henan JianShen Metal Materials Co., Ltd. takes into account the corrosive action of the gas during the manufacture. Therefore, the surface of the tank is painted, sprayed or plated to enhance the performance and strength of the tank and prevent the medium from being placed on the container. corrosion. Therefore, the LPG filling station of Henan JianShen Metal Materials Co., Ltd. is the best choice for users.
The LPG skid station pressure gauge should be calibrated every six months. Always check the pressure gauge for normal operation. It is strictly forbidden that the pointer is broken or loose or the indication is not accurate. The failure pressure gauge of the spring tube leakage in the watch is still in use. Sewage LPG skid station for regular cleaning valves should be regularly discharged as daily, so as not to accumulate too much water to accelerate the corrosion of the tank and affect the life of the pressure vessel.
If the surface of the LPG skid station is found to be severely damaged during use, it should be repainted to prevent excessive corrosion of the LPG skid station and affect the service life. According to the actual use of the user, the LPG skid station should be cleaned regularly to ensure that the LPG is cleaned in the armor, so as to prevent the oil from collapsing inside the LPG.
The LPG skid station of Henan JianShen Metal Materials Co., Ltd. takes into account the corrosive action of the gas during the manufacture. Therefore, the surface of the tank is painted, sprayed or plated to enhance the performance and strength of the tank and prevent the medium from being placed on the container. corrosion. Therefore, the LPG filling station of Henan JianShen Metal Materials Co., Ltd. is the best choice for users.
Send Your Inquiry
We not only provide a good product, but also provide high quality service. If you are interested in our products,
you can contact us in the following ways.
you can contact us in the following ways.
