Causes of paint peeling off of SF double-layer oil tank

In order to ensure that the SF double-layer oil tank is not eroded by the outside during use, a layer of paint is often applied on the surface of the SF double-layer oil tank. However, in the process of using the SF double-layer oil tank, there will be a phenomenon of paint peeling off. What is the reason for this? Next, I will tell you about pressure vessel manufacturers.

1. Moisture in the sf double-layer oil tank: when installing some sf double-layer oil tanks, bolts are usually needed to reinforce the oil tank, and the reinforced parts need to be polished. When the SF double-layer oil tank is used for a long time, cement, soil, etc. will enter the pressure vessel along the polished part, causing erosion and causing the paint to fall off. 2. Climatic factors: the climate in some areas is very humid, and the sf double-layer oil tank is buried underground, then the paint of the sf double-layer oil tank is severely eroded when the environment around the oil tank is wet As a result, the paint of the pressure vessel has fallen off.

The above is the reason why the paint of the oil tank brought by the sf double-layer oil tank manufacturer, I hope it can help everyone. For the above method, when installing and using the SF double-layer oil tank, anti-corrosion measures should be taken at all parts, especially the reinforcement parts, so that the paint of the SF double-layer oil tank can be better avoided. For more information about pressure vessels, you can follow this website.