The necessity of double-layer oil tank transformation

Compared with single-layer oil storage tanks and anti-seepage tanks, double-layer oil tanks have the characteristics of better environmental protection and thermal insulation, low construction difficulty coefficient, and higher quality reliability, and are more in line with the future basic construction trend of oil stations. The SF double-layer oil tank produced by Henan Jianshen Company has the following characteristics:

1. The pressure vessel is made of special polyester film, which can be attached to the outer wall without any adhesive;

2. The double-layer oil tank is made of high-strength, ductile ductile tape to ensure that the gap of the tank body is uniform and the uniform thickness of the gap is above 0.1mm.

3. The double-layer oil tank body is coated with polyurethane paint, which can effectively prevent the boundary page reaction between the oil tank and the outer structural layer resin, thereby ensuring that the pressure vessel effectively forms an interlayer gap layer;

4. Continuous jet surge technology is adopted to prevent the generation of air bubbles, and the content of glue drops from the normal value of 73% to below 65%; 5. A special unique process is adopted in the attachment area of ​​the oil tank body to ensure that there is no gap and no delamination between the FRP and iron parts;

6. The double-layer oil tank is equipped with a special type anti-static device interface to effectively discharge the static electricity generated by the oil tank body;

7. Re-install the leak detection and monitoring system for the pressure vessel to detect oil and water. If there is a leak, immediately report to the police