Home » Cryogenic Tank » 1.6MPa LN2 cryogenic tank

https://www.jianshentank.com/storagetank

1.6MPa LN2 cryogenic tank

Content

The picture is the liquid nitrogen storage tank produced by our company. We provide vertical and horizontal options, and produce 5-200m³ storage tanks, which can well meet your needs. If you have different requirements for tank pressure, we can also set the pressure for you.
Precautions for liquid nitrogen operation: closed operation. Closed operation, providing good natural ventilation. Operators must undergo special training and strictly abide by operating procedures. It is recommended that operators wear cold-proof clothing and cold-proof gloves. Prevent gas leakage into workplace air. When handling, lightly load and unload to prevent damage to cylinders and accessories. Equipped with leakage emergency treatment equipment.

Inquiry

More Cryogenic Tank

Cryogenic tank material for double cylinder structure, inner tube and pipe made of stainless steel S30408 shell made of
alloy steel Q245R.
Cryogenic tanks structure: vertical tanks, horizontal tanks.
We specialize in vacuum insulated liquid storage tanks
Adiabatic method: powder adiabatic
Working pressure: 0.2-3.0mpa
Effective volume: 5-200m3
The design temperature: – 196 ¡ã C – 50 ¡ã C
Filling rate: 95%

Cryogenic tank material

Liquid carbon dioxide gas tanks are commonly used for: 1. Used in the alkali industry, sugar industry and carbonated beverage production 2. Used in the quenching of steel castings and the manuf...

20 cubic carbon dioxide storage tank

Microbulk systems have safety features such as pressure relief valves and built-in monitoring systems to ensure proper functioning. MicroBulk tanks provide safe on-site storage of cryogenic liquids, thereby increasing operational safety, quality, and efficiency.

Micro bulk tank storage system

(9) After the low-temperature valve is used for a period of time, liquid leakage will occur. If slight leakage is found in the upper gland, the packing gland should be tightened. If the valve core ...

Keep the site tidy around LNG storage tanks

The cryogenic oxygen cylinder is a special high-pressure container for storing and transporting oxygen. It is composed of four parts: a bottle body, a bottle collar, a bottle valve and a bottle cap...

High pressure oxygen cylinder

If the measured wall thickness is less than the minimum wall thickness of the container, the strength verification should be re-performed, and pressure reduction or repair measures should be propos...

Strength verification of cryogenic storage tanks

3D printing technology is commonly used in aerospace, automotive and medical&dental fields. For 3D printers that use laser melting to print steel, aluminum or titanium powder metal parts, in or...

Nitrogen with 3D printer

LNG tanks, or liquefied natural gas tanks, are containers used to store liquefied natural gas.

LNG tanks

Under normal circumstances, the inner surface of the cryogenic storage tank uses carbon-based conductive electrostatic paint, which is prone to pitting, which will affect its service life.

The inner surface of the cryogenic storage tank uses carbon-based conductive electrostatic paint

Above picture is the 10cubic meter liquid carbon dioxide tank,the tank design pressure is 2.16Mpa,our LCO2 tank is double layers structure，it can be divided into 2 parts，the inner vessel ismade o...

10cbm liquid carbon dioxide tank

Our Liquefied natural gas tank advanatage Vertical tanks Small footprint compared to horizontal tank. Heavy foundations. Sizes up to approximately 200 M³ per tank. Horizontal tanks ...

Liquefied natural gas tank

Parameter name: inner container outer shell Q245R Working pressure: 2.16 Design pressure: 2.2--0.04 MPa Working temperature: -35 Design temperature: -40 Medium name: LCO2 Medium characteristics:...

LCO2（ liquid carbon dioxide）

Repair air leaks. According to the cause of air leakage, take corresponding measures to repair, such as replacing damaged seals, tightening loose valves, etc. Check other tanks. When dealing with a...

Precautions for cryogenic storage tank problems

As we can see from the picture is our vertical liquefied oxygen tank.The cryogenic storage tank for oxygen is a double-walled, vertical structure, and uses vacuum powder for heat preservation. The ...

Vertical liquefied oxygen tank LOX storage tank

Observe strict safety regulations and drain the container as soon as you suspect damage

Strictly observe safety regulations when using cryogenic storage tanks

We will inspect and test the mechanical properties and chemical composition of the raw steel steel plate of the storage tank to avoid internal defects of the material. The welded joints, welds, and...

Horizontal LNG Tank

ASME ⅡA516/ A516M "Carbon Steel Plates for Medium and Low Temperature Pressure Vessels" SA516 Gr60. The bottom plate of the inner tank and the lower part of the tank body are made of SA537Cl. ...

Cryogenic tank material

Actual customer applications: 1. Gas filling station; 2. Oxygen cylinder filling station; 3. Oxygen station for hospitals; 4. For fish tanks; 5. Steel plants; 6. Nitrogen is used to clean pipes; 7....

Cryogenic carbon dioxide storage tank application

Liquid oxygen filling stations require a series of equipment to ensure safe and efficient filling of liquid oxygen into cylinders. Here are the main pieces of equipment you may need at a liquid oxy...

Liquid oxygen filling stations

Our LCO2 tank advantage： The blanking is carried out by CNC plasma cutting machine, and the geometric dimensions of the cylinder section are strictly packed. Submerged arc welding is used fo...

LCO2 tank carbon dioxide pant

Pressure vessel operators need to be trained in safety techniques, be familiar with vessel performance and basic principles, and master operating skills and safety regulations. Pressure vess...

General Safety of Pressure Vessels

air-heated vaporizer is a type of vaporizer used to convert liquid gases into their gaseous form through the application of heat from the surrounding air.

air-heated vaporizer