20tons LPG plant

Install a water leakage prevention device on the up/down valve which connects the water level gauge and the storage tank. If the water level gauge is damaged due to an accident, the upper and lower valves will close automatically.

As liquid LPG is lighter than water, the water injected into the tank will hold the LPG to the water surface, isolating the LPG from the leak. At this point, the main spray from the leak is water rather than pure LPG, and then other methods are used to plug the leak. In the process of plugging the leak, the release valve at the top of the tank can be opened to release the gaseous LPG, which is less likely to form a hazard and reduces the pressure in the tank.

Less vibration, less wearing parts; Simple working conditions.

Overpressure protection: The gas dispenser is equipped with an overpressure protection device to prevent the gas pressure from being too high and causing danger.

The process of installing the water mains outlet of the LPG storage tank
The water pump is connected to the fire water pipe and the fire water tank to ensure the continuity and reliability of the water supply. The pump outlet of the two pipelines must be equipped with check valves, once the pressure of the LPG pipeline is large, LPG will not reverse into the fire water pipeline.

LPG storage tanks are usually installed next to heating, gas or welding equipment to allow flexibility in delivering the fuel to where it is needed.

Horizontal LPG storage tanks are those in which the long axis of the tank is parallel to the ground and the tank is placed horizontally.

Liquefied petroleum gas storage tanks are storage type pressure vessels for storing liquid petroleum gas, and the volume of liquefied petroleum gas has to be enlarged by 800 times when it changes from liquid to gas.