Home » cryogenic LNG storage tank » Filling process of LNG storage tank

Filling process of LNG storage tank

Liquid filling   After pre-cooling, close the bottom liquid inlet valve of the cryogenic storage tank and the top liquid inlet valve of the tanker, and slowly open the bottom of the tanker. ...
Rated 4.5/5 based on 451 customer reviews
Share:
Content
  1. Liquid filling

 

After pre-cooling, close the bottom liquid inlet valve of the cryogenic storage tank and the top liquid inlet valve of the tanker, and slowly open the bottom of the tanker.

 

The low-temperature liquid slowly enters the low-temperature storage tank from the top liquid inlet valve of the low-temperature storage tank. The liquid must be filled slowly to avoid damage to the low-temperature storage tank due to rapid cooling. During the initial filling period, the pressure in the cryogenic storage tank will rise sharply. At this time, the size of the manual vent valve should be adjusted to ensure that the pressure in the cryogenic storage tank is about 0.1MPa lower than the tanker pressure.

Inquiry


    More cryogenic LNG storage tank