Home » boiler » Gas boiler burner failure and treatment methods 6

Gas boiler burner failure and treatment methods 6

When the gas boiler is normal at a low fire and switches to a high fire, it goes out or flickers unsteadily.

Rated 4.9/5 based on 515 customer reviews
Share:
Content

When the gas boiler is normal at a low fire and switches to a high fire, it goes out or flickers unsteadily. Reason:

4.The distance between the cyclone disk and the oil nozzle is improper.
5. The oil nozzle for high fire is worn or dirty.
6. The heating temperature of the reserve oil tank is too high, causing the steam to make the oil pump deliver oil unsmoothly.
7. The oil in the fuel boiler contains water.
Treatment measures: gradually reduce the test; increase the heating temperature; adjust the distance (between 0~10mm); clean or replace; set to about 50℃; change oil or drain.

Inquiry


    More boiler