Introduction to LPG storage tanks
LPG storage tanks are pressure vessels used for storing LPG, commonly used in large, medium and small gas stations.
LPG storage tanks are pressure vessels used for storing LPG, commonly used in large, medium and small gas stations.
1. The design of the tank should be in line with the current national standard “Pressure Vessel” GB 150 and “Fixed Pressure Vessel Safety Technology Supervision Regulations” of the relevant provisions of the design service life of up to 20 years.
2. Good safety performance, in the design of the use of conditions within the scope of no use of safety hazards.
3. The design pressure of LPG storage tank should not be less than 1.78MPa, compact structure, easy to install and maintain.
4. The height of the liquid outlet piping port of the tank should be determined according to the requirements of the selected filling pump. The inlet piping and liquid phase return piping should be connected to the gas phase space in the storage tank.
5. Real material, cost-effective; raw material selection of domestic first-class manufacturers of steel, quality assurance.
6. Complete models, LPG storage tank volume from 5m³ to 200m³, to meet the needs of different customers.
7. All LPG tanks are heat-treated for stress relief.
8. 100% X-ray inspection of all main body welds, 100% surface flaw detection of C.D welding of receiver and flange to ensure the welding quality. The company has set up non-destructive flaw detection room and has licensed flaw detectors at all levels;
9. Hydrostatic test by unit to ensure the safety of equipment strength. One by one air tightness test, to ensure that the equipment sealing performance.
