Liquefied Petroleum Gas Storage Tank Safety Pressure Relief Facilities

Take the common specification 50m3 liquefied gas storage tank as an example, in order to ensure the design service life of the tank, the nominal thickness of the head is 14mm according to the standard, but the steel plate for the head of our company adopts the customised steel plate with a small thickness of 14.7mm.

LPG (Liquefied Petroleum Gas) stations are vital hubs for the storage and distribution of this clean and efficient energy source.

The principle of the magnetic flap level gauge is the communicating vessel principle.

As liquid LPG is lighter than water, the water injected into the tank will hold the LPG to the water surface, isolating the LPG from the leak. At this point, the main spray from the leak is water rather than pure LPG, and then other methods are used to plug the leak. In the process of plugging the leak, the release valve at the top of the tank can be opened to release the gaseous LPG, which is less likely to form a hazard and reduces the pressure in the tank.

LPG tanks need to comply with strict safety standards and regulatory requirements during the design and manufacturing process to ensure the safety of the storage and transportation process.