LPG storage tank Accessories—air pump

The pump type is positive displacement vane pump, work by the vane centrifugal sliding, the flow rate and the shaft speed related, the stator inner surface using the domestic original compound curve made, the stator and rotor, baffle, vane composition of ten sealing cavity, because the stator surface is compound curve, when the rotor rotation, the inlet cavity volume gradually increased, and the formation of negative pressure to produce suction, so that the oil will be sucked.

Precautions for vane pumps that have not been used for a long time or when they are used for the first time

The pump type is positive displacement vane pump, work by the vane centrifugal sliding, the flow rate and the shaft speed related, the stator inner surface using the domestic original compound curve made, the stator and rotor, baffle, vane composition of ten sealing cavity, because the stator surface is compound curve, when the rotor rotation, the inlet cavity volume gradually increased, and the formation of negative pressure to produce suction, so that the oil will be sucked.

The YQB series LPG pumps produced by our company are mainly used for transporting LPG, propylene and liquid ammonia, and are also suitable for drainage and irrigation or transporting various volatile liquids and petroleum products of similar nature.

Ex control cabinets may switch on and off pumps and dispensers, as well as protect pipes. If one of the electrical devices fails, the cabinet will shut down immediately to protect other equipment.

The pump is mainly composed of the motor, pulley, transmission box and pump head.

Working principle and application of CO2 pump

Maintenance and care of CO2 pumps