LPG storage tank raw material production

Liquefied Petroleum Gas (LPG) is a term that describes a group of hydrocarbon gases derived from crude oil and/or natural gas. LPG is produced by distilled natural gas about 55% and crude oil refineries about 45%.

The country has not yet issued relevant standards and specifications for the design and construction of cryogenic storage tanks for liquefied hydrocarbons such as propane and LPG.

As liquid LPG is lighter than water, the water injected into the tank will hold the LPG to the water surface, isolating the LPG from the leak. At this point, the main spray from the leak is water rather than pure LPG, and then other methods are used to plug the leak. In the process of plugging the leak, the release valve at the top of the tank can be opened to release the gaseous LPG, which is less likely to form a hazard and reduces the pressure in the tank.

The cylinder should be placed in a well-ventilated place, and the distance between the fire source, heat source should not be less than 1.5 m.

Gas generators powered by liquefied petroleum gas range from small to large sizes. wall mounted to vertical Air-heated, from 50 kg/h to 30,000 kg/h, as well as mobile loading and unloading stations for temporary gas applications.

Pumps are devices used to extract liquefied petroleum gas (LPG) from storage tanks and deliver it to dispensers or distribution systems.

In essence, a vaporizer is a boiler without the ability to generate pressure.LPG is a liquid when it enters the vaporizer and a gas when it leaves.Vaporizers are useful for a wide range of applications and are an essential part of many LPG and propane systems.Vaporizers protect against the chilling effect that results in icing and pressure loss, but they do not create more pressure.

Repeat the above operation three times or more, and the replacement of the storage tank is complete. When replaced by carbon dioxide, the gas is sucked in through the liquid inlet.