lpg tank Anti-corrosion treatment and maintenance

filling job
1. Open all valves in the liquid phase pipe between the liquid outlet and the dispenser. and open all valves in the return pipe.
2. Supply air to the fluid port pneumatic isolating valve to the open position, so that the liquefied petroleum gas in the storage tank communicates with the filling pump.

Liquefied gas storage tanks should be installed in a well ventilated area. and at least 1.5 meters away from the fire or heat source.

The LPG gas station explosion-proof electric control cabinet is a special equipment used to control and protect the electrical system in the LPG skid-mounted gas station.

Liquefied petroleum gas storage tanks are storage type pressure vessels for storing liquid petroleum gas, and the volume of liquefied petroleum gas has to be enlarged by 800 times when it changes from liquid to gas.

The process of installing the water mains outlet of the LPG storage tank
The water pump is connected to the fire water pipe and the fire water tank to ensure the continuity and reliability of the water supply. The pump outlet of the two pipelines must be equipped with check valves, once the pressure of the LPG pipeline is large, LPG will not reverse into the fire water pipeline.

The LPG storage tank inspection schedule is as follows. When to inspect LPG storage tanks: at least once a year. The internal and external audit periods are divided as follows: At least every 6 years for security levels 1-3. At least every three years for Security Status Levels 3-

Why does the liquefied gas storage tank corrode?
when using liquefied petroleum gas storage tanks Be careful if corrosion occurs. Corrosion needs to be taken care of as it can seriously affect the proper functioning of the equipment if not handled properly, making it difficult to.