LPG tanks

Overpressure protection: The gas dispenser is equipped with an overpressure protection device to prevent the gas pressure from being too high and causing danger.

Technical features of LPG skid-mounted equipment

Step 1: Gas Cleaning – The extracted natural gas or related gas from gas fields or oil wells is brought up for cleaning using filtration techniques. Impurities are totally removed at this stage, leaving behind a hydrocarbon mixture (methane, ethane, propane, and so on).

lpg is an explosive gas, so when building an LPG filling station attention needs to be paid to the placement of lpg tanks and the distance between them.The explosion range of LPG is not too wide, but because of its small lower limit, it is easy to ignite and explode in the event of a leak.

Tank placement
The tank and any building, boundary line, or stationary source of ignition should be at least a certain distance apart (referred to as the separation distance). If you are unsure of the distance, the supplier will know what it should be.

LPG compressors generally need to have the following characteristics:High corrosion resistance:Stability and safety:High efficiency.

Maintaining a secure environment is imperative in LPG stations.

There are two types of dispensers, one for filling vehicles and the other for filling cylinders. It is undeniable that in recent years there has been an increasing demand for refuellers used for the purpose of filling LPG-fuelled vehicles, which are fuelled by liquefied petroleum gas and are the most widely used of all alternative gas and diesel vehicles worldwide.

LPG compressor is a device used to convert liquefied petroleum gas (LPG) into gaseous state

Advantages and environmental benefits of LPG filling stations

LPG electronic filling scale is an important device for automatic measurement and control during the filling process of liquefied petroleum gas (LPG).

The pressure should be the design pressure of the storage tank and pipe system respectively. Before the transfer station is filled with LPG, the system must be deaerated with nitrogen or vacuum to remove the air in the system.

In terms of safety, due to the flammable and explosive characteristics of liquefied gas, LPG electronic filling scale needs to meet strict explosion-proof standards.

In a diverse energy landscape, choosing the right energy source is crucial.