Home » Cryogenic Tank » Questions on liquid oxygen bottling plant

https://www.jianshentank.com/storagetank

Questions on liquid oxygen bottling plant

Cryogenic gas manifold Automatic gas switching panel

Content

1.What re inclusive in whole package. Could you mail me the Packing list?
HNJS: All things in the contract are included, please check the attached contract
2.Complete diagram inclusive of:
A.Foundation of Liquid Tank (already received)
B.Overall diagram (Standard layout) of liquid tank, oxygen pump, vaporizer, refilling plant. (Front view, top view, side view) with all dimension
C.Layout of entire bottling plant？
HNJS: Our company designer need the customer to draw a sketch by himself, indicating each key position and the distance between each other, and then we can help you make a drawing in CAD/PDF format.
3.How low should oxygen pump should be fitted as respect to Oxygen Tank?
HNJS: No requirements, It depends on the on-site environment of the hospital
4.Distance of Oxygen pump with Oxygen Tank?
HNJS: Liquid oxygen tank liquid oxygen outlet keep less 1 meter distance with pump inlet port
5.How far can Refilling Plant be fitted from the Oxygen Tank and vaporizer?
HNJS: No requirements, It depends on the on-site environment of the hospital

Inquiry

More Cryogenic Tank

The daily inspection of cryogenic tanks mainly includes the following contents: Whether there are leaks in valves and pipelines, and whether the shell is frosted or sweating. Whether all va...

Daily inspection of cryogenic tanks

When performing filling operations, operators are not allowed to leave the site, and must operate in strict accordance with the operating procedures, observe pressure changes, and avoid excessi...

LNG storage tank filling process

The Dewar cryogenic liquefied gas storage tank used for LNG LOX LN2 LAR is a vacuum insulated stainless steel container, which can be used to store and transport cryogenic liquid gas after the desi...

Portable LOX tank

The surrounding environment should not be too hot, and it should not be used in high-altitude areas, because this will change the gas pressure in the tank and cause it to burst, causing losses.

When we use cryogenic storage tanks, we must pay attention to the surrounding temperature

When the pressure of the inner cylinder of the liquid oxygen storage tank rises abnormally, the safety valve jumps. It may be caused by the following three reasons: the vacuum degree of the interla...

Cryogenic oxygen storage tank

The filling station for LCo2 is one of our company's main products. It is a hot-selling product. Sanhuangding focuses on the manufacture of pressure vessels. The capacity of the co2 filling station...

Liquefied carbon dioxide tank

The low freezing point of liquid nitrogen makes liquid nitrogen have excellent heat transfer performance, so it can realize rapid cooling of food.Because of its high thermal stability, its boiling ...

Advantages of cryogenic liquid nitrogen storage tanks

Regularly clean, refuel and maintain the equipment in the production area to ensure that various equipment operates normally and can be opened flexibly.

Safety management of LNG tank

LNG storage tanks are widely used in the reception stations of LPG, liquefied factories, satellite liquefied devices, industrial gas vaporization stations, etc.

LNG storage tank application field

(1) Check whether the quality of cryogenic materials is qualified; (2) Check the welding quality; (3) Check the shrinkage of pipelines and the change of pipe support;

Pre-cooling purpose: To inspect and test the low-temperature performance of cryogenic equipment and pipelines

If the hidden dangers before these accidents are not discovered and dealt with in time, it will develop into a serious accident. Therefore, it is very important to formulate a complete inspection s...

Inspection of cryogenic storage tanks

Liquid argon storage tanks are devices used to store liquid argon, which typically exists at extremely low temperatures (approximately -196 degrees Celsius or -321 degrees Fahrenheit). Liquid argon...

the usage of Liquid argon storage tanks

Henan Jianshen Metal Materials Co., Ltd. is a domestic cryogenic pressure vessel manufacturer. Key products include cryogenic storage tanks, LNG storage tanks, Dewar flasks (welded insulated gas cy...

Key products include cryogenic storage tanks

Inner layer: 16MnDR alloy steel Inner tank thickness: 12-28mm Outer layer: Q235R alloy steel Outer tank thickness: 8-12mm Design pressure: 2.2Mpa Operating pressure: 2.16Mpa Design temp...

Description of cryogenic liquid carbon dioxide storage tanks

Components of carbon dioxide storage tank：Head, tank, saddle, lifting lugs (for lifting) Valves: liquid inlet valve, liquid discharge valve (liquid outlet valve), vacuum valve, air return valve ...

Cryogenic storage tanks——carbon dioxide storage tank description

We will inspect and test the mechanical properties and chemical composition of the raw steel steel plate of the storage tank to avoid internal defects of the material. The welded joints, welds, and...

Horizontal LNG Tank

When designing a pressure vessel, it is necessary to refer to the expected service life and consider corrosion margin and other conditions to determine the service life of the vessel.

Design of cryogenic pressure vessels

The oxygen tank is one of the main products of our company. The material of the inner tank is austenitic stainless steel. The material of the outer container is Q235-B or 345R according to the nat...

LOX tank for oxygen filling station

LCO2 storage tanks: the key to efficient and safe storage

Of course, for large liquid output flow, the automatic booster valve is generally required to have a large diameter to meet the need for a large amount of gas replenishment. It is difficult for a m...

Automatic regulating device for cryogenic tanks

Simply speaking, cryogenic storage tanks can be divided into three simple categories. First of all, according to the temperature of the working medium in the pot, it can be divided into two categor...

Cryogenic storage tanks can be divided into three simple categories

1.5 Cryogenic liquid storage tanks are special equipment subject to national compulsory safety supervision. They are included in the second category of pressure vessels and should be subject to reg...

Cryogenic liquid storage tanks are special equipment subject to national compulsory safety supervision.

Carbon dioxide storage tanks in the production process should use special roller frame (such as roller lined with rubber or tape, cloth winding, etc.), lifting jigs and other process equipment.

standards for the carbon dioxide storage tank production environment

(7) There are pressure gauges and differential pressure level gauges on the storage tanks, as well as on-site instructions and remote transmission. The remote transmission is used to collect automa...

LNG storage tanks have pressure gauges and differential pressure level gauges

cryogenic tank for double cylinder structure, inner tube and pipe made of stainless steel S30408 shell made of
alloy steel Q245R.
Cryogenic tanks structure: vertical tanks, horizontal tanks.
We specialize in vacuum insulated liquid storage tanks
Adiabatic method: powder adiabatic
Working pressure: 0.2-3.0mpa
Effective volume: 5-200m3
The design temperature: – 196 ¡ã C – 50 ¡ã C
Filling rate: 95%

cryogenic tank