Safety valves for lpg storage tanks

Under normal conditions of use, periodic sensitivity checks and safety accessory checks should be performed.

LPG storage tanks are mainly used in liquefied petroleum gas stations, the production process of storage tanks has a number of important processes are:

Storage tanks (LPG storage tanks) are devices for storing compressed air (LPG) and are widely used for industrial, commercial and household purposes.

The design principle of soil-covered storage tanks is mainly to partially bury the tanks into the soil and then cover them with soil to realize the protection and isolation of the tanks.

The tank area is poorly protected against flammable gases and cannot be detected in time. If an ignition source is found, it may cause fire or explosion.Container explosion Ambient temperature rises in summer.

Liquefied gas storage tanks should be installed in a well ventilated area. and at least 1.5 meters away from the fire or heat source.

Ignition of these vapors may cause a fire or explosion. It is not recommended to paint the tank in a color other than the body color itself. This will reduce the danger.

In the LPG tank hydrostatic test, should be a smooth pressure increase and decrease, in order to prevent water pressure impact and damage the seal of the pipe joints.

Before the equipment goes into service or is put back into service after an extended outage, maintenance or relocation. You need to replace the air in the tank.

Emergency shut-off valve: The emergency shut-off valve is a valve that can be quickly closed manually or automatically in an emergency. Immediately shut off the gas source to prevent further accidents.