Home » Cryogenic Tank » Selection of anti-corrosion coating for low-temperature storage tanks

https://www.jianshentank.com/storagetank

Selection of anti-corrosion coating for low-temperature storage tanks

This is the coating used for low-temperature storage tanks. If the anti-corrosion is not done well, it will directly affect the use and service life of the storage tank. The selection of anti-corro...

Water-based lithium silicate zinc-rich paint is used on the outer surface of the bottom plate of the cryogenic storage tank

LNG gasification station LNG storage tank

Content

Inquiry

More Cryogenic Tank

Multiple guarantees of LNG cold preservation, pressure resistance and stability Natural gas liquefaction is to put pre-treated natural gas into a heat exchanger for low-temperature refrigeration...

Multiple guarantees of LNG cold preservation

Carbon dioxide and argon (CO2+Ar)mixture gas is one of the important methods for gas shielded welding CO2+Ar mixture is used as a shielding gas for welding The use of welding is increasing ln count...

Mixture Gas of Carbon Dioxide and Argon

Small liquid oxygen filling station, including liquid oxygen storage tank, liquid oxygen pump, and oxygenation platform; Gauge 1 and vacuum plug, safety valve 1 and pressure gauge 1 are respectivel...

Small liquid oxygen filling station

The air-temperature vaporizer has the advantages of low cost, no pollution, simple maintenance and high reliability.

Characteristics of air temperature type vaporizer

The outer surface of the low-temperature storage tank bottom plate is made of water-based lithium silicate zinc-rich coating. It has good anti-corrosion effect, will not affect the welding construc...

The outer surface of the cryogenic storage tank bottom plate is made of water-based lithium silicate zinc-rich coating

⑦ After a period of use, the cryogenic valve will leak. If a slight leak is found in the upper gland, the packing gland should be tightened. If the valve core cannot be closed, the valve core shoul...

Valve precautions for cryogenic tanks

“Dewar flask” refers to a specific type of pressure vessel used to store industrial gases

Dewar flask

Liquid oxygen taank is used for storage and supply of cryogenic liquid like liquid oxygen, liquid nitrogen,liquid argon and liquid carbon dioxide.Our liquid oxygen tank has advantages of area-savin...

Horizontal type liquefied oxygen tank

When about 10% of the liquid remains in the tanker, open the liquid inlet valve at the bottom of the cryogenic storage tank to fully discharge the liquid in the tanker. At this time, the liquid inl...

After cryogenic storage tank is filled with liquid, the internal pressure is generally maintained at about 0.25~0.35MPa.

5. Regularly check the vacuum degree in the jacket of cryogenic liquid storage tank. If the vacuum degree deteriorates, take measures to supplement the vacuum (the vacuum of the storage tank should...

Regularly check the vacuum degree in the jacket of cryogenic liquid storage tank

External inspection is both the work of the inspectors and the daily inspection items of the operators. If a safety hazard is found (such as cracks, deformation, severe leakage, etc. in the pressur...

Safe operation of pressure vessels

The most common one is the hot water low temperature storage tank, which can be used for domestic hot water and heating and other areas. So how to classify the hot water low temperature storage tan...

Hot water cryogenic storage tank

The cryogenic vacuum storage tank is completely sealed with dry nitrogen before leaving the factory. After receiving the product, the customer should conduct an overall air-tightness test (blow out...

Cryogenic Vacuum Storage Tank

Maintenance and care of liquid oxygen tanks

Micro bulk tanks are generally a type of tank used to store gases or liquids in larger quantities than a small gas cylinder, but not large enough to require traditional bulk storage methods.

Micro Bulk Tanks

Henan Jianshen Metal Materials Co., Ltd. is a leading enterprise in China.The company's quality system is perfect, processing equipment complete, welding technology is advanced, relying on professi...

Dewar LOX tank

In simple terms, cryogenic storage tanks can be divided into three simple categories. First, according to the temperature of the working medium in the boiler, it can be divided into two categories...

High and cryogenic of the working medium in the cryogenic storage tank pot

The cryogenic liquid CO2 storage tank is double walled. The internal material uses 16mndr stainless steel and the external material uses q245r carbon steel.

cryogenic liquid CO2 storage tank

The filling principle of LNG LOX LN2 LAR Dewar cryogenic liquefied gas storage tank is direct filling through pressure difference. Be sure to fill the Dewar flask with the same medium.Determine the...

Dewar cryogenic liquid gas storage tank

LNG (Liquefied Natural Gas) storage tanks are specialized equipment used to store liquefied natural gas.

LNG (Liquefied Natural Gas) Storage Tanks

Whether the liquid filling rate exceeds 95%. For atmospheric pressure powder insulated storage tanks, is the sealing gas normal? (50mmH2O)

Cryogenic storage tank liquid filling rate

City Gate Station, Regional Pressure Regulator, Pressure Regulator Box, and a pressure control box in the building It is widely used in areas where natural gas pipelines can be reached.

cryogenics lng tank

Our cryogenic tanks are constructed using high quality materials and advanced manufacturing processes to ensure superior durability and safety in extremely low temperature environments.

Cryogenic Tank Introduction

Henan Jianshen Metal Materials Co., Ltd. is a domestic cryogenic pressure vessel manufacturer. Key products include cryogenic storage tanks, LNG storage tanks, Dewar flasks (welded insulated gas cy...

Key products include cryogenic storage tanks

Oxygen welding is a common method of joining and cutting metals that requires specific equipment and tools to perform. The following are the main equipment you may need when performing oxygen weldi...

Oxygen welding is a common method of joining and cutting metals

Our Liquefied natural gas tank advanatage Vertical tanks Small footprint compared to horizontal tank. Heavy foundations. Sizes up to approximately 200 M³ per tank. Horizontal tanks ...

Liquefied natural gas tank

As we can see from the picture is a vertical liquefied oxygen tank.The Cryogenic Tank LOX Tank is a double-layer fixed vacuum storage tank .This series of products are mainly used for cryogenic liq...

LOX tank for hospital

As we can see from the picture is our liquefied carbon dioxide tank,the tank design pressure is 2.16Mpa.The Large carbon dioxide storage tank using nine-point support and sling structure of carbon...

2.16Mpa LCO2 tank

The voltage of the probe must not exceed 36V, and flexible, well-insulated wire and solid grounding must be used. Follow correct procedures and pay attention to sealing performance to ensure no air leaks to reduce leakage.

20ft cryogenic lng tank

The intermediate paint adopts the matching intermediate paint of GR heat-insulating reflective paint, and is applied in 2 coats, with a thickness>100μm; the topcoat adopts GR heat-insulating ref...

The intermediate paint of the cryogenic storage tank adopts the matching intermediate paint of GR heat-insulating reflective paint