Home » Cryogenic Tank » Selection of Foundation Types for Cryogenic Storage Tanks

https://www.jianshentank.com/storagetank

Selection of Foundation Types for Cryogenic Storage Tanks

Content

There are two current ways to remove the cooling capacity. One is to use electric heat tracing, that is, to embed a certain amount of resistance wire in the foundation. Automatic power off when above. When using this electric heat tracing method, the ground type is used as the foundation.

Inquiry

More Cryogenic Tank

During operation, the correct safety and operating regulations must be strictly observed. We recommend our customers to emphasize safety and safe operation regulations to their employees and users.

Cryogenic storage tanks

The cryogenic series products produced by Henan Jianshen Metal Materials Co., Ltd. have been unanimously recognized by domestic and foreign customers, because the products are of low price and good...

5m³ Vertical liquid oxygen storage tank

he insulation layer of micro bulk tanks is usually made of materials

The insulation layer of micro bulk tanks

Main Applications of Liquid Nitrogen Storage Tanks

The structure of the high pressure CO2 tank is double layers .The material of the inner layer of the storage tank is 16Mndr, which is a low-temperature material specially used for carbon dioxide. T...

Liquefied carbon dioxide tank

LNG storage tanks are pressure vessel equipment. According to the requirements of the "Pressure Vessel Safety Technical Supervision Regulations" promulgated and implemented, units with correspo...

LNG storage tank installation, repair and modification

According to the reading of the liquid level gauge and referring to the liquid level comparison table, the actual loading volume of the cryogenic tank can be read; the working pressure of the tank ...

Cryogenic tank measurement

1 cubic meter of liquid can replace 130 gas cylinders. It can replace the daily round-trip transportation with gas cylinders, saving a lot of human and material resources. It is widely used in the ...

5000liter oxygen cylinder

The inner and outer surfaces of the outer container of the storage tank have been sandblasted to meet strict standard requirements. After the surface of the steel plate is metallic, the dust attach...

Cryogenic liquid carbon dioxide storage tank

Parameter name: inner container outer shell Q245R Working pressure: 2.16 Design pressure: 2.2--0.04 MPa Working temperature: -35 Design temperature: -40 Medium name: LCO2 Medium characteristics:...

LCO2（ liquid carbon dioxide）

With the advancement of science, people have put forward higher requirements for food safety. Traditional frozen storage methods mainly use liquid nitrogen or dry ice as refrigerants, but these ref...

Uses of cryogenic liquid nitrogen storage tanks

LNG gasification pressure regulating skid maintenance and maintenance. Different pressure regulator manufacturers produce different pressure regulators, and all have specified service cycles for th...

lng filling station

The cryogenic vacuum storage tank is completely sealed with dry nitrogen before leaving the factory. After receiving the product, the customer should conduct an overall air-tightness test (blow out...

Cryogenic Vacuum Storage Tank

Natural gas is the cleanest energy source on earth. In addition to being used as fuel, it can also be used for power generation, air liquefaction and food freezing. Natural gas is one of the safer ...

20CBM LNG plant

(9) After a period of use, the low-temperature valve will leak. If a slight leak is found on the upper gland, the packing gland should be tightened. If the valve core cannot be closed, the valve co...

It is strictly forbidden to add oil and water to the valves of cryogenic storage tanks

(9) After the low-temperature valve is used for a period of time, liquid leakage will occur. If slight leakage is found in the upper gland, the packing gland should be tightened. If the valve core ...

Keep the site tidy around LNG storage tanks

As we can see from the picture is our liqurfied argon tank,the advantages of the LAR tank is simple operation, compact structure, less maintenance and long service life.It can be widely used in mac...

LAR Tank

The main function of the cryogenic liquid storage tank is to fill and store cryogenic liquid. For the safe use requirements of cryogenic liquid storage tanks, the hazardous characteristics of gases...

Main functions of cryogenic liquid storage tanks

When it is found that the storage tank has been emptied and there is no pressure, the storage tank is very cold, and all valves must be closed immediately to prevent moisture from entering the inne...

Inspection of cryogenic storage tanks

The earthquake resistance requirement of general buildings is that they will not crack under regular earthquake loads. In order to ensure the safety of LNG cryogenic storage tanks under unexpected ...

Earthquake Resistance of Cryogenic Storage Tanks

Oxygen Cylinder for Covid Hospital is generally used for industry, hospitals, fish ponds, plants, gas cylinder filling, etc. We provide 2 standard pressures, 0.8Mpa and 1.6Mpa for our customers to ...

liquid oxygen tank for hospital

Whether the instruments (liquid level gauge, pressure gauge) of cryogenic liquid storage tanks work normally, and whether the parameters displayed by DCS are consistent with the on-site primary...

Instruments (liquid level gauge, pressure gauge) of cryogenic liquid storage tanks work

Multilayer winding insulation technology is a method of improving thermal insulation performance by alternately winding multiple layers of insulation materials (such as polyethylene, polyurethane, etc.) around pipes or equipment.

Multilayer winding insulation technology