Storage tank product design and production

lpg cylinders are easy to use and portable, but in use, attention should be paid to the following: cylinders should be placed in a well-ventilated place, and the distance between them and fire and heat sources should not be less than 1.5 m.

Choice of valve fittings and flanges: manhole covers, safety valves, manual air bleed valves.

LPG tanks need to comply with strict safety standards and regulatory requirements during the design and manufacturing process to ensure the safety of the storage and transportation process.

Overpressure protection: The gas dispenser is equipped with an overpressure protection device to prevent the gas pressure from being too high and causing danger.

(Injection type is also called Venturi type), follow-flow gas mixing, high-pressure proportional gas mixing, mobile gas mixing station, skid-mounted natural gas pressure reducing station, gate station, regional pressure control box, building pressure control box, liquefied natural gas equipment, and other products.

A skid-mounted station is made up of a storage tank and two pumps. In the pipe portion, one pump forms the unloading system and the other forms the filling system; these two systems can be utilized temporarily if one of them fails.

Repeat the above operation three times or more, and the replacement of the storage tank is complete. When replaced by carbon dioxide, the gas is sucked in through the liquid inlet.

LPG is a volatile, colourless liquid obtained by liquefying natural gas or petroleum under pressure or reduced pressure in refining plants. It is highly spontaneous and can explode when exposed to open flame if its concentration in the air exceeds a certain level. The density of LPG in the liquid state, which decreases as the temperature increases, increases as the temperature decreases.