cryogenic tank for sale

When the carburettor is in operation, when the piston moves down and the inlet valve opens, air from the air filter enters through the inlet and flows into the carburettor through the air damper.

Liquefied natural gas (LNG) is a flammable and explosive medium. The use site should be managed in accordance with the gas regulations, with gas alarm and cut-off devices, the electrical unit used should be explosion-proof electrical, and explosion-proof tools should be used for operation and maintenance.

The storage tank contains a cryogenic or low-temperature medium, and direct contactwith personnel can cause cold burns similar to burns. The operator must protect the eyes andskin that are easy to contact with liquid or frozen gas, such as wearing protective goggles or face shields, and antifreeze Gloves etc.

Our cryogenic liquid oxygen storage tank, comprising an outer cylinder made of S30408 stainless steel and an inner cylinder set in the outer cylinder, with a jacket between the outer cylinder and the inner cylinder. Said outer cylinder is also surrounded by multiple rows of reinforcement hoops, said reinforcement hoops are provided with rubber rings on the outside.

During operation, the correct safety and operating regulations must be strictly observed. We recommend our customers to emphasize safety and safe operation regulations to their employees and users.

The pump is mainly composed of the motor, pulley, transmission box and pump head.

Welded insulated gas cylinders (hereinafter referred to as gas cylinders) have a double-layer structure, with an insulating layer between the inner liner and the outer shell. The insulating layer is equipped with multiple layers of insulating material and maintains a high vacuum, and is used for the transport and storage of deep cold liquids such as liquid nitrogen and liquid oxygen.

The storage tank is composed of a carbon steel or stainless steel shell and a pressure vessel placed in it. The interlayer is multi-layer winding insulation and maintains a high vacuum state. The site is operated under the design pressure according to the actual situation.

As the carbon dioxide storage tank is the storage of low-temperature liquid, once the accident occurs, the refrigerated liquid will evaporate a lot, the amount of gasification refrigeration of the original state about 300 times, in the atmosphere will form an automatic detonation gas mass.

For excessive residual stresses caused by welding, the welding residual stresses should be eliminated after welding. Industrial liquid nitrogen at a very low temperature from nitrogen pressurized into a colorless liquid, then the temperature of liquid nitrogen is very low,

We are in the production of low temperature pressure vessels, for low temperature pressure vessels first of all to choose the appropriate materials, these materials should have good toughness at the use of temperature.

Design temperature of -20 ℃ below the pressure vessel: liquefied ethylene, liquefied natural gas, liquid nitrogen and liquid hydrogen storage and transport of containers are low temperature pressure vessels.

The low temperature liquid nitrogen storage tank series is a double-layer vacuum powder adiabatic storage tank for storing liquid oxygen, liquid nitrogen, liquid argon, carbon dioxide and liquefied natural gas.

The liquid argon cryogenic storage tank is made of stainless steel for the inner lining and Q235B or Q345R for the outer lining, and the surface anti-corrosion coating is done by sandblasting, rust removal, blowing, spraying and other processes, while a two-component fast-curing liquid coating is used.

Dewar bottles usually have four valves: one for liquids, one for gases, one to empty and one to boost pressure. In addition, there is a pressure gauge and level gauge for the gaseous phase. Dewar cylinders are equipped with a rupture disc as well as a safety valve.

Small, safe and easy-to-use gas supply and storage modules that make (liquid) gas supply more widely available;
Centralized gas supply in an integrated design combining a small storage tank, booster, vaporizer and piping system (booster and vaporizer are available in an integrated or external version);