The outer cylinder of the liquefied gas storage tank is made of carbon steel vessel plate, which can also be designed and manufactured according to the requirements of users, and is a better choice for centralised gas supply system.
The crankshaft is made of high quality carbon steel, with a single abduction and balance weight. The crankshaft is made of high quality carbon steel, with a single turn and a balancing weight.
The compressor set is ZW type, oil-free, one-stage compression, and the whole set is arranged on a common base. The set has a compact structure, smooth operation, easy maintenance, low noise, low vibration, safe and reliable.
The LPG tank weigher has a large diameter pollution resistant automatic shut-off valve, which solves the common defect of blocking solenoid valves in similar products. The compact electromechanical linkage can be battery driven and meets the intrinsically safe explosion-proof requirements, overcoming the need to lay explosion-proof AC power lines for similar products.
The LPG filling machine for vehicles manufactured by our company is a liquefied petroleum gas (LPG) filling machine
The main component of LPG is propane (over 95%), with a small amount of butane. LPG is stored in liquid form under the appropriate pressure in storage tank containers and is often used as cooking fuel and as a source of power for driving cars.
lpg is an explosive gas, so when building an LPG filling station attention needs to be paid to the placement of lpg tanks and the distance between them.The explosion range of LPG is not too wide, but because of its small lower limit, it is easy to ignite and explode in the event of a leak.
The cylinder should not be used up, but should be left with a certain residual pressure. The residual pressure should generally be greater than 49.03kPa (i.e. 0.5kg/cm2 , gauge pressure) to prevent air from entering the cylinder.
lpg cylinders are easy to use and portable, but in use, attention should be paid to the following: cylinders should be placed in a well-ventilated place, and the distance between them and fire and heat sources should not be less than 1.5 m.
An LPG skid is a group of equipment fixed to a chassis made of angle brackets or I-beams, which can be moved and positioned using a skid (now a lifting device).
The main material of the Air Temperature Vapouriser is a large finned tube made of aluminium alloy, which has a larger heat exchange area per unit length and better heat exchange performance. Low temperature liquid evaporators utilise the low boiling point of liquid gases when they evaporate at low temperatures.
Our tanks are produced in strict accordance with national standards and have strict requirements on the filling volume.In LPG storage tanks at room temperature and pressure, in gas-liquid equilibrium, the gaseous pressure is the saturated vapour pressure at the current temperature, so the density of the gaseous state in the container increases as the temperature rises.
Material:Alloy steel Q345R Product Name:gas station lpg Color:white or customized Medium:Lpg propane butane Design Pressure:1.77Mpa Working Presure:1.6Mpa The effective volume:5000-50000 liter/3MT-30MT Technics:submerged-arc welding Net Weight:3623-92143Kg