LPG filling station

Use water to replace the air in the tank first, and then use inert gas to replace the water in the tank. That is, water as an intermediate medium for replacement.

Before the equipment is newly put into use or put into use again after long-term disuse, maintenance or relocation, the air in the tank must be replaced (direct filling of LPG without replacement is strictly prohibited).

We recommend our customers to emphasize safety and safe operation regulations to their employees and users.

The LPG skid-filling and filling stations manufactured by our company are specially designed with a leak alarm system. In case of gas leakage from the skid, an alarm can be issued in time to avoid safety accidents caused by gas leakage.

Our company has made a series of improvements in the design of LPG skid-mounted vehicle filling stations, in which the two LPG pumps carried are different.

The main equipment of the LPG skid-filling and filling station are gas storage tanks (10 cubic meters one, when filling LPG, can only be filled no more than 90%, and after use not all used up, should be left about 15%), a filling machine, two LPG pumps, liquid level meter, thermometer, pressure gauge, power distribution and operation box, leak probe, alarm fire system sprinkler and pipeline valves, etc.

The structure of compressors produced by our company are simple and reliable. The cylinder seat is made of grey cast iron and is positioned with the middle body using a pin or stop. The valve is arranged axially on the cylinder seat.

The pressure should be the design pressure of the storage tank and pipe system respectively. Before the transfer station is filled with LPG, the system must be deaerated with nitrogen or vacuum to remove the air in the system.

The pump type is positive displacement vane pump, work by the vane centrifugal sliding, the flow rate and the shaft speed related, the stator inner surface using the domestic original compound curve made, the stator and rotor, baffle, vane composition of ten sealing cavity, because the stator surface is compound curve, when the rotor rotation, the inlet cavity volume gradually increased, and the formation of negative pressure to produce suction, so that the oil will be sucked.

The compressor set is ZW type, oil-free, one-stage compression, and the whole set is arranged on a common base. The set has a compact structure, smooth operation, easy maintenance, low noise, low vibration, safe and reliable.

Our LPG dispensers are divided into two categories for filling vehicles and cylinders, with cylinders for filling vehicles being subdivided into scale filling, filling scales and filling machines.

The LPG filling machine for vehicles manufactured by our company is a liquefied petroleum gas (LPG) filling machine

Our company has a strict production process and professional production mode. LPG storage tanks are put into batch production and assembly line production mode, through mechanization, high degree of automation equipment and process tooling to improve product production efficiency and product quality.

A sliding system is one in which a group of units is fixed to a chassis made of angle brackets or I-beams, which can be moved and positioned using skids (now with lifting devices).