Home » Cryogenic Tank » The inner and outer surfaces of the stainless steel liner of the cryogenic storage tank are degreased and pickled and passivated

www.jianshentank.com

The inner and outer surfaces of the stainless steel liner of the cryogenic storage tank are degreased and pickled and passivated

The elbows of the cryogenic storage tank are bent on a CNC pipe bending machine

The outer surface of the cryogenic liquid tank adopts a fully automatic steel shot sandblasting and rust removal technology

Content

Five, the inner and outer surfaces of the stainless steel liner are degreased and pickled and passivated, and the inner and outer surfaces of the carbon steel shell are sandblasted and rust-removed, which ensures the adhesion of the paint, extends the corrosion resistance of the paint, improves the corrosion resistance of the stainless steel plate, and reduces the degassing of the interlayer, that is, ensures the life of the vacuum degree.

Inquiry

More Cryogenic Tank

An electric heating vaporizer is a device

Electric heating vaporizer

The LNG storage tank is a professional product for storing LNG. The low-temperature lng storage tank is a double-layer cylindrical structure, the inner cylinder and its piping are made of stainless...

80m³ LNG Cryogenic storage tank

The LNG cryogenic storage tank is used to store liquid natural gas, and the equipment is required to have good pressure bearing capacity and high thermal insulation. The stainless steel inner tank ...

Horizontal LNG Tank

5tonne VIE tank is a form of pressure vessel that allows the bulk storage of cryogenic liquids including oxygen, nitrogen and argon for industrial processes and medical applications. The purpose o...

5tonne VIE tank

According to the reading of the liquid level gauge and the liquid level comparison table, the actual loading volume of the cryogenic tank can be read; according to the pressure gauge, the working p...

LNG tank measurement

The industrial oxygen tank is one of the main products of our company. The material of the inner tank is austenitic stainless steel. The material of the outer container is Q235-B or 345R according ...

Hospital oxygen tank

For the thermal insulation design of the top of the liquid nitrogen storage tank, because the cold insulation material is covered above the ceiling of the inner tank, there is no need for the liqui...

Insulation Design of Cryogenic Liquid Oxygen Storage Tank

liquid nitrogen storage tanks are large in size and capacity, which can meet the storage needs of a large number of biological materials.

Liquid nitrogen storage tanks advantages

1 cubic meter of liquid can replace 130 gas cylinders. It can replace the daily round-trip transportation with gas cylinders, saving a lot of human and material resources. It is widely used in the ...

5000liter oxygen cylinder

As we can see from thepicture is micro bulk tank,it used to storage the liquefied oxygen gas.The liquid in the micro storage tank is connected to the storage tank by a low temperature tanker and th...

Micro bulk tank for lox

Open the top liquid inlet valve and bottom liquid inlet valve of the cryogenic storage tank at the same time, slowly open the top liquid inlet valve of the tank truck, and use the low-temperature g...

Top liquid inlet valve and bottom liquid inlet valve of the cryogenic storage tank

3. **Design**: - **Double-Walled Construction**: Most cryogenic LO2 tanks feature a double-walled design with a vacuum or insulating layer between the walls. This design helps maintain the low tem...

Understanding LOX tank(2)

Emergency Response Training: Make sure all personnel are well-trained in emergency response, including evacuation procedures and use of emergency shutdown systems. Conduct regular drill...

A few safety guidelines for handling LOX, N2 and Ar storage tanks(3)

With the development of technology, light-colored non-carbon electrostatic conductive anti-corrosion coatings are now available. Applying 4 coats of non-carbon electrostatic conductive anti-corrosi...

Total coating dry film thickness for cryogenic storage tanks

(1) Determination of vacuum between inner and outer interlayers (cycle one year) (2) Daily inspection of supporting facilities of storage tank equipment: fire sprinkler pipes on the ou...

Determination of vacuum between inner and outer interlayers of cryogenic storage tanks

Pressure vessels are often seen in our industrial production and are closely related to our lives. However, a pressure vessel is expensive, has complex production processes, and requires a large am...

Cryogenic pressure vessel

The working pressure is high (the working pressure of the two storage tanks for bottom-blown argon in the fourth workshop is 2.0 MPa). There is a gasifier outside the tank, which can not only incre...

Working pressure of cryogenic storage tanks

The design pressure of CO2 liquid vertical storage tank is usually 2.3Mpa, and the working pressure can reach 2.16MPa.

CO2 liquid vertical storage tank parameters

(3) When filling to 85% of the tank volume, the upper liquid inlet valve should be closed and filling should be stopped for 3 minutes to allow the liquid level in the tank to rise. Then open the up...

Lng storage tank filling process

The cryogenic storage tank for oxygen is a double-walled, vertical structure, and uses vacuum powder for heat preservation. The cryogenic oxygen storage tank has the advantages of compact structure...

8 Bar/16 Bar Liquefied oxygen storage tank

Cryogenic liquid storage tank is a storage pressure vessel for storing liquid oxygen, carbon dioxide storage tank, liquid argon, carbon dioxide and other media.

5-100m3 cryogenic liquid storage tank

The use of cryogenic tanks should be strictly in accordance with the requirements of the use of the operation to ensure that the use of the process of safety and reliability.

Use of cryogenic tanks

The actual loading volume of the cryogenic storage tank can be read according to the reading of the liquid level gauge and the liquid level comparison table; the working pressure of the storage tan...

cryogenic storage tank Measurement

After precooling, close the bottom inlet valve of the cryogenic tank and the top inlet valve of the tank truck, slowly open the bottom inlet valve of the tank truck, and the cryogenic liquid slowly...

Filling process of cryogenic tank

Henan Jianshen Metal Materials Co., Ltd. is committed to producing high-quality and low-cost products for customers to meet the needs of customers to the greatest extent. The size of products produ...

20CBM LO2 tank

Cryogenic storage tanks are often called cryogenic tanks or liquid nitrogen storage tanks. Its structure can be divided into two layers. The inner layer is made of austenitic stainless steel, and t...

Cryogenic storage tank

3.1 Vacuuming 3.1.1 Start the vacuum pump, slowly open the vacuum valve, start vacuuming, and record the start date and time of vacuuming and the ambient temperature. D (dynamic) or J ...

Process procedure of cryogenic natural gas storage tank

Prevent liquid oxygen leakage and freezing of facilities and people. LNG storage tanks should maintain positive pressure to prevent the absorption of wet air and cause freezing a...

LNG storage tanks should maintain positive pressure

cryogenic tank for double cylinder structure, inner tube and pipe made of stainless steel S30408 shell made of
alloy steel Q245R.
Cryogenic tanks structure: vertical tanks, horizontal tanks.
We specialize in vacuum insulated liquid storage tanks
Adiabatic method: powder adiabatic
Working pressure: 0.2-3.0mpa
Effective volume: 5-200m3
The design temperature: – 196 ¡ã C – 50 ¡ã C
Filling rate: 95%

cryogenic tank

Therefore, we must always pay attention to the surrounding environment, and we can also find out whether liquid nitrogen is leaking. In addition, the surrounding environment should not be too hot, ...

We must always pay attention to the surrounding environment when using cryogenic storage tanks