Working principle and application of CO2 pump

CO2 pump

Content

The working principle of CO2 pump is mainly based on pressure difference. It transports CO2 from low-pressure area to high-pressure area through mechanical action to meet various industrial and commercial needs.

During the working process, the CO2 pump first sucks low-pressure CO2 gas through the air inlet. Then, the internal impeller or piston and other components start to operate to compress the gas. As the compression process proceeds, the pressure of the gas gradually increases and eventually reaches the required high-pressure state. At this time, the high-pressure gas will be discharged through the air outlet for subsequent processes or equipment.

Inquiry

More air pimp

Working principle and application of CO2 pump

Ex control cabinets may switch on and off pumps and dispensers, as well as protect pipes. If one of the electrical devices fails, the cabinet will shut down immediately to protect other equipment.

Explosion-proof electronic control cabinet for LPG Tank

Precautions for vane pumps that have not been used for a long time or when they are used for the first time

Notes on the use of vane pumps

The pump type is positive displacement vane pump, work by the vane centrifugal sliding, the flow rate and the shaft speed related, the stator inner surface using the domestic original compound curve made, the stator and rotor, baffle, vane composition of ten sealing cavity, because the stator surface is compound curve, when the rotor rotation, the inlet cavity volume gradually increased, and the formation of negative pressure to produce suction, so that the oil will be sucked.

Structure of the vane pump

LPG pump

advantage: 1. Can be used as a backup. Filling cylinders/car pumps are more commonly used, and unloading pumps can act as air filling pumps if something goes wrong. 2. One for car charging, one f...

LPG storage tank Accessories—air pump

The YQB series LPG pumps produced by our company are mainly used for transporting LPG, propylene and liquid ammonia, and are also suitable for drainage and irrigation or transporting various volatile liquids and petroleum products of similar nature.

LPGpump

Maintenance and care of CO2 pumps

The pump is mainly composed of the motor, pulley, transmission box and pump head.

CO2 liquid pump